-
-
工业和信息化部 自然资源部:2021年度稀土开采、冶炼分离总量控制指标
넶0 2021-10-08 -
-
南方高科2021年度挂牌(2021年9月26日更新)
넶0 2021-04-02 -
-
-
-
工业和信息化部 自然资源部:2021年度稀土开采、冶炼分离总量控制指标
넶0 2021-10-08 -
-
南方高科2021年度挂牌(2021年9月26日更新)
넶0 2021-04-02 -
-
上海能普实业有限公司Shanghai Nengpu Industrial Co.,Ltd.
Safety Date Sheet
Lanthanum Carbonate product
1.Identification
▪Product Name:Lanthanum Carbonate
▪Manufacturer Information:
Company Name:Shanghai Nengpu Industrial Co.,Ltd.
Company Address:3128 Huyi Highway, 9th Floor, Jiading, Shanghai, China
Department:Technical Division, Quality Assurance Department
Duty Officer:X ianzhi W u , C hunsheng Ma, Chong Guan
Zip Code: 201801
TEL: 086-021-31109051
Mobile: 17717060951
Fax: 086-021-59157533
Email Address:tb3461@sina.com
Emergency Contact:13524019558
2.Hazard(s) identification ▪Classification of the substance or mixture
Skin Sens. 1 H317 May cause an allergic skin reaction.
▪Label elements
▪GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
▪Hazard pictograms
▪Signal word Warning
▪Hazard-determining components of labeling:
Rare Earth Compound
▪Hazard statements:
May cause an allergic skin reaction.
▪Precautionary statements:
Avoid breathing dust/fume/gas/mist/vapors/spray
Wear protective gloves.
Contaminated work clothing must not be allowed out of the workplace. Wash contaminated clothing before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
Page
1
/
11
上海能普实业有限公司Shanghai Nengpu Industrial Co.,Ltd.
IF ON SKIN: Wash with plenty of water.
Specific treatment (see on this label).
Dispose of contents/container in accordance with local/regional/national/international regulations. ▪Classification system:
▪NFPA ratings (scale 0 -4)
▪
HMIS-
ratings (scale 0
-
4)
3.Composition/information on ingredients ▪Name:Lanthanum Carbonate
▪Chemical Composition
Substance
percentage %
CAS
No.
La
O
95-99
1312-81-8
2
3
CeO
2.0
1306-38-3
<
2
Fe
O
0.1
1332-37-2
<
2
3
Na
O
0.2
1313-59-3
<
2
4.
aid measures ▪Description of first aid measures
▪General information:
Immediately remove contaminated clothing if necessary to prevent direct skin
contact.
▪After inhalation:Supply fresh air; consult doctor in case of complaints.
▪After skin contact:
Immediately flush skin with water for at least 15 minutes.
If skin irritation occur, consult a doctor.
▪After eye contact:
Flush opened eye with large quantities of running water for at least 30 minutes. If
symptoms occur,consult a doctor.
▪ After swallowing: Do not induce vomiting; immediately call for medical help.
▪Information for doctor:
▪Most important symptoms and effects, both acute and delayed
No further relevant information available.
▪Indication of any immediate medical attention and special treatment needed
No further relevant information available.
First-
Page
2
/
11
上海能普实业有限公司Shanghai Nengpu Industrial Co.,Ltd.
fighting measures
▪Suitable extinguishing agents: Use fire fighting measures that suit the
environment.
▪For safety reasons unsuitable extinguishing agents: Water with full jet
▪Hazardous combustion products
Carbon monoxide and carbon dioxide
Metal oxide fume
▪Protective equipment:
Wear personal protective equipment.
Wear respiratory protective device.
▪Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with
official regulations.
Collect contaminated fire fighting water separately. It must not enter the sewage
system.
6.Accidental release measures
▪Personal precautions, protective equipment and emergency procedures
Wear protective clothing.
▪Environmental precautions: Do not allow to enter sewers/ surface or ground
water.
▪Methods and material for containment and cleaning up:
Vacuuming or wet sweeping may be used to avoid dust dispersal.
Clean the affected area carefully; suitable cleaners are:
Use appropriate industrial vacuum cleaners or central vacuum systems for dust
removal.
Ensure adequate ventilation.
Dispose contaminated material as waste according to section 13.
▪Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7.Handling and storage ▪Handling:
▪Precautions for safe handling
Keep receptacles tightly sealed.
Avoid formation of respirable particles.
Prevent formation of dust.
▪Information about protection against explosions and fires: The product is not
flammable.
▪Conditions for safe storage, including any incompatibilities
▪Storage:
▪Requirements to be met by storerooms and receptacles: Store only in the original
5.
Fire-
Page
3
/
11
上海能普实业有限公司Shanghai Nengpu Industrial Co.,Ltd.
receptacle.
▪Information about storage in one common storage facility:
Store away from foodstuffs.
Do not store together with acids.
Store away from water.
▪Further information about storage conditions:
This product is hygroscopic.
Protect from humidity and water.
Store in cool, dry conditions in well sealed receptacles.
Keep receptacle tightly sealed.
8.Exposure controls/personal protection ▪Additional information about design of technical systems: No further data; see
item 7.
▪Components with limit values that require monitoring at the workplace: Not
required.
▪Additional information: Valid lists at time of creation were used as basis.
▪Exposure controls
▪Personal protective equipment:
▪General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Prevent contact with the eyes and skin.
Do not inhale dust / smoke / mist.
▪Breathing equipment:
In case of brief exposure use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air. As appropriate for the employee exposure, use a NIOSH approved respirator and
cartridge.
▪Protection of hands:
Avoid direct contact with the chemical/ the product/ the preparation by
organizational measures.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Check protective gloves prior to each use for their proper condition.
Wear gloves for the protection against mechanical hazards.
Use gloves of stable material (e.g. Nitrile)
▪ Material of gloves
Recommen ded thickness of the material: 0.35 mm ≥
Page
4
/
11
上海能普实业有限公司Shanghai Nengpu Industrial Co.,Ltd.
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefo re to be checked prior to the application.
▪For the permanent contact in work areas without heightened risk of injury
(e.g.Laboratory) gloves made of the following material are suitable:
Butyl rubber, BR
Nitrile rubber, NBR
▪For the permanent contact gloves made of the following materials are suitable:Butyl rubber, BR
Nitrile rubber, NBR
▪Not suitable are gloves made of the following materials:
Strong fabric gloves
Leather gloves
▪Eye protection:
▪Body protection: Protective work clothing
9.Physical and chemical properties ▪ Information on basic physical and chemical properties
▪General Information
▪Appearance:
Form:Pulver
Color:White
▪Odor:Odorless
▪Odour threshold:Not available.
▪pH-value at 20 °C (68 °F):≈ 7
▪Change in condition
Melting point/Melting range:400 °C (752 °F)
Boiling point/Boiling range: Not determined.
▪Conditions of flammability
Flash point:Not available.
▪Flammability (solid, gaseous):Product is not flammable.
▪ Ignition temperature:Not available.
▪Decomposition temperature: 320 °C (608 °F)
▪Auto igniting:Product is not self-igniting.
▪Danger of explosion:Product does not present an explosion hazard.
▪Explosion limits:
Lower:- Vol %
Upper:- Vol %
▪Vapor pressure:Not applicable.
Page
5
/
11